Vibrator

Plastic vibrator



一、Product description
Rotary Powder Sieve Industrial Round Vibrating Screen is composed of a upper cover, a screen box, a base and a vertical motor with eccentric weight installed at two ends. Can be produced in horizontal, vertical, inclined motions by adjusting the upper and lower eccentric weight. Diameter also can be ranged from 400mm to 2000mm, with single or multiple screening decks, material can be total carbon steel, total stainless steel or material contact parts are stainless steel according to different product.

二、Technical parameter

Model Nominal diameter(mm) Screen diameter(mm) Screen surface area(m³) Feeding size(mm) No. of layers Frequency(r/min) Power(kw)
SW-400 400 340 0.09 <10 1-5 1500 0.18
SW-600 600 530 0.22 <10 0.25
SW-800 800 720 0.4 <20 0.55
SW-1000 1000 900 0.63 <20 0.75
SW-1200 1200 1100 0.95 <20 1.1
SW-1500 1500 1400 1.5 <20 1.5
SW-1800 1800 1710 2.3 <30 2.2
SW-2000 2000 1910 2.86 <30 3.7


















三、Product advantage

1.High efficiency, compact design and durability, any powder and mucilage are suitable.
2.Change sieve and clean easy, operate simply.
3.The mesh is not blocked and the powder is not flying, be screened to 500 mesh or 0.028mm.
4.Impurities coarse material discharged automatically and can continuous operation.
5.The unique grid design, sieve for a long time, changing sieve fast just need 3-5 minutes.
6.Small, space-saving, easy to move.
7.The screening machine can achieve the maximum five, we recommended to use three.

四、Working Principle
The vibration is accomplished by eccentric weights on the upper and lower ends of the motion-generator shaft. The direction of the eccentric weights can change its rotational mode, rotation of the upper weight creates vibration in the horizontal plane, which causes material to move across the screen cloth to the periphery, while the lower weight acts to tilt the machine, causing vibration in the vertical and tangential planes. The trajectories of materials on the screen can be changed by adjusting the phase angle of upper and lower weights.



五、Packing loading



六、Service
1. Pre-sale consulting by skilled and experienced engineers 
Our sales engineers are with regular training about our product to ensure they have good knowledge to communicate with customer. They are also backed up with our technical department to maximize customer needs and requirements.

2. Overseas offices can provide on-site consultation and service
We have representative in overseas office and ready to service you. Please contact with us to see whether we have office in your country. If no office in your country, our sale engineers may book time to meet with you as they always travelling overseas to meet with customers. Or our after service engineer may also meet with you as they are always doing commissioning overseas.
3. Provide pick up service when visit workshop
Our company is near Shanghai City, with airport and train station nearby. Once customers arrive in Shanghai or other cities nearby, we will provide pick up service. If customers are not clear about how to arrive to our company, please consult with our sales engineers. Our sales engineers will guide you the best way to our company and even book flight or train ticket for you.
4. Whole machines can be highly customized based on requirements
If customers have special requirements, please inform our sales engineers. We can customize the machine to match your needs. Our technical department will also assess the risk and feasibility of the project to protect your benefits.
5. Provide turnkey solution easy to start new business
We not only sell machinery, we provide turnkey solution. Our sales engineer will inform customer auxiliary equipment to start the whole project, together with workshop, water and electricity requirement. We will also provide project feasibility analysis to show how much investment to start the project (raw material, labor, workshop, machinery, etc.) and approximate time to get back the investment. If anything not clear, feel free to contact us.